Ultra-high pressure cleaning machine automatic pipe feeding
An automated Ultra High Pressure cleaning machine (UHPC) consists of a nozzle, a pump, a sensor and a wall to protect the equipment from recontamination. One machine can clean complex and long pipe lines. Its maximum working pressure is 1400 bars, with a maximum flow rate of 190 l/min. Several advantages of this system are listed below:
High-pressure washing machines can be used for many purposes. High-pressure washing machines can be used for domestic or professional jobs. They use water jets to clean surfaces. The hose, which extends from the drum outlet to the nozzle inlet, accounts for more than half of the pressure loss. Without the right hose, the cleaning machine will fail to reach its full potential.
An automatic pipe feeder unit allows the hose to be fed into the machine without operator assistance. Its adjustable wheels feed the hose automatically into or out of the machine. The Feeder Unit and a hose guide are integral parts of this unit. The Feeder Unit is easily moveable and can be adjusted to any position. This allows you to feed and take out the hose in the most efficient way possible.
Application way of ultra high pressure cleaning pipe
The high-pressure water jet technology is used for the cleaning of pipes and fixed installations. It is an efficient way to remove deposits from pipes and can reach remote locations that are difficult to access. This type of cleaning also has a low environmental impact, as it recycles the medium water used in the cleaning process. It is quick, efficient, and easy to use. In addition, this technology is highly effective in cleaning a wide range of materials, including concrete.
High-pressure water can be used to remove dirt and grime unlike other cleaning methods. It can also be used to clean pipes that have been covered with thick, sticky deposits. It uses an internal piston pump that pumps water from the water connection. The water is then emitted from the spray gun by the outlet valve that allows it to flow to the high-pressurehose. However, the pressure decreases on its way to the spray gun, so the cleaner must be used in a well-ventilated area.
HP water jetting is a process for removing debris from a variety of surfaces. It is often used in the sewer cleaning industry for removing debris from pipes. The process can be used to clean pipes in many industries, including pharmaceuticals, petrochemicals, and plastics. It can also be used to clean surfaces prior to coating. Coatings won’t perform as intended if the surface isn’t prepared properly.
Ultra high pressure pipe of cleaning machine
During the cleaning operation, high-pressure water is used. Rotating speed of the pump controls the cleaning pressure. The machine includes a feed hopper to ease the cleaning operation and a high-pressure water pipe to provide sufficient cleaning pressure. An auxiliary mode is available to clean the blades. This way, the cleaning performance of the machine can be maximized. Here, we will discuss the advantages and disadvantages of this equipment.
The Feeder Unit’s front side houses the feeder hopper as well as the hydraulic giant. The hose is fed into and out of the pipe by an automatic feed mechanism. The rotating hose is designed for the cleaning of complex or bended pipe line constructions. The cleaning pressure can reach up to 1400bar at a maximum flow rate of 190l/min. The ultra high pressure cleaning machine features a feeder hopper and a high-pressurenozzle.
The inlet pressure of the nozzle can be optimized to achieve a wide cleaning area with a narrow spray angle and short distance. The spraying nozzle angle is tilted 10 degrees towards the transfer direction to minimize contaminant splash towards the cleaned area. It is important to carry out experimental evaluations for the various parameters and conditions in order to achieve the best cleaning results.
