process performance of high pressure drainage hose
High-pressure drainage pipes must meet the requirements for high-pressure installations. The typical hose length is 120 to 200 meters. Special cleaning vehicles may require hoses up to 800 metres. The flow accelerator in water jetting pipes reduces pressure loss. A hose’s pressure rating should not be lower than 50 bar.
High-pressure jetting is used in 90% of sewer cleaning processes. It removes deposits and helps in sewer rehabilitation and inspection. However, it cannot remove internal projecting laterals or flow obstacles. Consequently, a high-pressure jetting vehicle can only clean a certain part of a sewer.
characteristics of high pressure drain hose
There are a few important characteristics to high pressure drain hoses. These tools are designed to remove blockages at high pressure. The rotating nozzle in these devices targets the inner surface of the drain pipe to clear it of debris that can attach itself to the pipe wall. Sometimes, the clog is too stubborn to be cleared by a snake auger. This tool is the best option for preventing future problems.
Mine high pressure drainage hose
Mine high pressure drainage hoses are used for drainage purposes, and are available in various nominal sizes and pressure ranges. They are made of high-resistant steel and have black synthetic rubber covers. They can withstand temperatures ranging from -40 to +100degC, and can be used for various fluids, including air, water, and chemicals. Some are also FM and UL approved.
Depending on the application, mine high-pressure drainage hoses can be used in a variety of industries. Some are used in hazardous areas, while others are used to pipe and drain. These hoses can be used in hazardous environments or for piping and drainage.
Mining hoses are generally made from rubber, but they also can be made from plastic. For example, the rubber water blast hose is widely used in mining, chemical production, and petroleum production, and is accepted around the world. Its maximum operating temperature is 175degF, which means it is relatively safe. It can also withstand various chemicals, radiation, and impact. Its high-pressure rubber construction makes the hose lighter than other similar hoses.
Jetting hose is a type of high-pressure drainage hose, and it can be used for water blasting and jet surface preparation. It is available in a wide range of diameters and pressures, ranging from 50 to 550 MPa. It can withstand temperatures of -40°C to 100°C. There are many thermoplastic materials that can be used for construction, such as polyoxymethylene and polyamide.
